+- Wings 3D Development Forum (https://www.wings3d.com/forum)
+-- Forum: Wings 3D (https://www.wings3d.com/forum/forumdisplay.php?fid=1)
+--- Forum: Gallery (https://www.wings3d.com/forum/forumdisplay.php?fid=10)
+--- Thread: My First Project-Table and Chairs (/showthread.php?tid=1460)
My First Project-Table and Chairs - skoobedo39 - 11-22-2015
My very first project is a raw and unrefined set of table and chairs. I spent about 5 hours creating, selecting, rotating, moving, scaling, undoing, redoing, beveling, cutting, looping, and all the other options I needed just to get to this simple result. I originally created the table using the VERY simple "Making a Table" by Paulthepuzzles (Thank you!!). I then opened the table after saving it and unchecked autosave so I could save this as a new project for chairs. I used the table and just followed the same extruding process on one end of the table for the backs of the chairs, then scaled it down to fit under the original table that I merged in the middle. The texturing took the longest, but I got it figured out. I am not too happy with the result, probably because I used a .bmp (wasn't sure if wings would support .jpeg images in Windows 10) image.
Now I am at a standstill because I don't know how to add other things like a floor, walls, shelves...etc. in order to make it look like it actually belongs somewhere.
Finally got the pictures to work!
All in all, I hope to refine this and turn it into something that can be used in a scene or something to that effect.
Thank you for reading!