Wings 3D Development Forum
Curved uv mapping - Printable Version

+- Wings 3D Development Forum (https://www.wings3d.com/forum)
+-- Forum: Wings 3D (https://www.wings3d.com/forum/forumdisplay.php?fid=1)
+--- Forum: Interface & Usage (https://www.wings3d.com/forum/forumdisplay.php?fid=3)
+--- Thread: Curved uv mapping (/showthread.php?tid=1102)

Curved uv mapping - DIEGONV40 - 03-16-2015

Hi! first sorry my little english. Im trying to build a tank. i got a problem using unfold in uv mapping:
This looks like curved.


if i use proyect normal this looks fine (because is rect), but only from up

RE: Curved uv mapping - micheus - 03-16-2015

Welcome to our community DIEGONV40

Yeah, this kind of shape give us always a headache. Unfortunately the UV code can't "see" the shape as our eyes and what seems to be a simple strip becomes a curve. Sad

So, a tip here is to mark many edges for cut - mainly in the curved area and use Unfolding option :
[Image: th_tank-uv-map1_zps6dfb80fb.png]
then, you can use "Stitch" to glue the pieces again. After you "rebuild" the stip you can select the vertices and use "Flatten" to ensure the vertices will be aligned:
[Image: th_tank-uv-map2_zpsde73544c.png]in this sample I also scaled them preserving the proportion.

In AutoUV window you can - at any moment - select one island (in body mode) and use Remap UV to remap it using one of Unfold, Projection Normal or Spherical. Just be aware that you will lose any arrangement or operation you had previously have done in that island. (but, undo still works Smile)


I hope that can help you.

RE: Curved uv mapping - DIEGONV40 - 03-17-2015

(03-16-2015, 07:57 PM)micheus Wrote: Welcome to our community DIEGONV40

Yeah, this kind of shape give us always a headache. Unfortunately the UV code can't "see" the shape as our eyes and what seems to be a simple strip becomes a curve. Sad

So, a tip here is to mark many edges for cut - mainly in the curved area and use Unfolding option :
[Image: th_tank-uv-map1_zps6dfb80fb.png]
then, you can use "Stitch" to glue the pieces again. After you "rebuild" the stip you can select the vertices and use "Flatten" to ensure the vertices will be aligned:
[Image: th_tank-uv-map2_zpsde73544c.png]in this sample I also scaled them preserving the proportion.

In AutoUV window you can - at any moment - select one island (in body mode) and use Remap UV to remap it using one of Unfold, Projection Normal or Spherical. Just be aware that you will lose any arrangement or operation you had previously have done in that island. (but, undo still works Smile)


I hope that can help you.
Thanks, i will try it

RE: Curved uv mapping - Stem - 03-19-2015

Hello

Select polygons around track > UV mapping


In UV window. Mark edge for cut.


RMB > Continue


RMB > Cylindrical Map.


Scale as required.




NOTE: If the track had evenly spaced polygons, on the UV map, you could select the outside edges and use circularize.

RE: Curved uv mapping - micheus - 03-19-2015

Stem, that is valid for a regular mesh when the "tiles" (faces) have the same size/length (as in your example), so you can use circularize to fix any distortion as result of Cylindrical map or any other method.

By considering the mesh shown by DIEGONV40 (he's using the minimum amount of polygons to build the track), it's not a good idea to use circularize - he will lose the proportions among the track faces ("tiles").
Without the circularize - to equalize - the lengths, the map will be stretched in the curved areas.