+- Wings 3D Development Forum (https://www.wings3d.com/forum)
+-- Forum: Wings 3D (https://www.wings3d.com/forum/forumdisplay.php?fid=1)
+--- Forum: Gallery (https://www.wings3d.com/forum/forumdisplay.php?fid=10)
+--- Thread: Takeart|Olaf from Frozen (/showthread.php?tid=2600)
Takeart|Olaf from Frozen - Marcin Maćkowiak - 12-24-2017
Hi,
It's x-masss time so I decided to do some winter time render. So here is a timelapse of Olaf from Frozen.
At the same time let me wish you a good time with your family, happy modeling and New Year!
Modeling: Wings 3D
Render: Cycles
![[Image: Olaf_PICm.jpg]](https://s26.postimg.org/njgv52vf9/Olaf_PICm.jpg)
![[Image: Olafpm.png]](https://s26.postimg.org/ebomoe3sl/Olafpm.png)
![[Image: Olafwirem.png]](https://s26.postimg.org/iktcqkerp/Olafwirem.png)
If you like my projects you can always follow me on Instagram or a Facebook fan page
Feel free to comment
Regards
Marcin Maćkowiak
RE: Takeart|Olaf from Frozen - micheus - 12-24-2017
Well done Marcin Maćkowiak
Maybe you used it for didactic purpose, but if not, I would suggest you to try the Sweep Region [RMB] instead of Extrude->Normal for the arm modelling. Very handy for that kind of extrusion.
Its easy to extract along the selected face normal (let say Z axis) and as you enter a perpendicular axis (in this case X) you can easily extrude, scale and rotate all at once. The use of repeat command [D] allow you to model it continuously and even for the fingers you still uses the repeat command.
As the Tweak commands aren't "repeatable" you can still make changes in the topology and selecting a face restart to repeat the Sweep command without problems.
Happy Christmas and a wonderful New Year to everyone.
I wish it could be a less quiet year for this Wings3D's community.
* Featured in our Wings3D fanpage at G+ and Facebook.
RE: Takeart|Olaf from Frozen - olve11 - 12-26-2017
Very impressive Marcin.
Good job
I now it's too late but - Merry christmas for everyone
and happy new year too
RE: Takeart|Olaf from Frozen - Marcin Maćkowiak - 12-28-2017
(12-24-2017, 12:19 PM)micheus Wrote: Maybe you used it for didactic purpose, but if not, I would suggest you to try the Sweep Region [RMB] instead of Extrude->Normal for the arm modelling.
It's weird that I didn't used this option in this case becouse for "sticks" hair I was using sweep region.
Thanks olve11!
RE: Takeart|Olaf from Frozen - micheus - 12-28-2017
That's happen.
I noticed you started to produce videos regularly. That's good. The community needs that.
Also I noticed you are using a interesting tool to show the hotkeys on screen. Cold you tell me which one is it?
RE: Takeart|Olaf from Frozen - Marcin Maćkowiak - 12-28-2017
(12-28-2017, 02:33 PM)micheus Wrote: I added them manualy - It took me more time than the video record ;DDon't tell me.
That's remember me about all the annotations I used to put in my YouTube videos.
I've been thinking it could be nice if we could have an option for that inside Wings3D.
RE: Takeart|Olaf from Frozen - Dimitri - 01-03-2018
Nice work, as usual! : - )