+- Wings 3D Development Forum (https://www.wings3d.com/forum)
+-- Forum: Wings 3D (https://www.wings3d.com/forum/forumdisplay.php?fid=1)
+--- Forum: Interface & Usage (https://www.wings3d.com/forum/forumdisplay.php?fid=3)
+--- Thread: How to do this sequence in 2.2.7 (/showthread.php?tid=3043)
How to do this sequence in 2.2.7 - GRUMP - 11-12-2021
Trying to make this work in 2.2.7 it all goes too fast for me and I miss something when I slow it down.
https://drive.google.com/file/d/1xIEvGEaFOUTZJQELiurH5eOanq_FR3oV/view?usp=sharing
I have this shape I am trying to work with as a test but any will do if somebody could talk me through whats happening to get the outcome?
https://drive.google.com/file/d/1QGC6kPrPtmSm8cvasllA9PICdQFRhIuz/view?usp=sharing
I have saved a sample to where this begins.
https://drive.google.com/file/d/1FzIFFuMD3G9MrVvBTUN44hZv25lPKnqf/view?usp=sharing
Many thanks in advance.
RE: How to do this sequence in 2.2.7 - micheus - 11-12-2021
I think they are different things, although you will need to use the first four minutes from my original video to draw the silhouette. After that, instead of make its revolution around the axis you will need to extrude the face.
RE: How to do this sequence in 2.2.7 - GRUMP - 11-12-2021
Aha, that makes a lot of sense to me and is what I have had to do.
I just thought i was missing something as I could not get anything to revolve on Y axis correctly.
Still a good tutorial though and using mplayer the shift &[ keys work well to slow it for me to keep up with. Thanks again for your excellent work.
RE: How to do this sequence in 2.2.7 - GRUMP - 11-13-2021
I notice this thread has been viewed by some others so for my reference and those who also may be interested, my work around is to do this:
Create initial shape, extrude Z by 0.1, rotate Y by 011.25, mirror until complete, weld, combine, colour, subdivide, save as obj.
https://drive.google.com/file/d/1O1mf6EuZxWeVXc2E3OvjnISHzekAv7oz/view?usp=sharing
https://drive.google.com/file/d/1lCzJJQ9A4RTrHD4uwDd43YjYFp5UDUxQ/view?usp=sharing
It may not be the correct method but it seems to be working for me until I discover otherwise, reason for wanting to do this, granddaughter wants a chess set printed from profiles of her favourite Disney characters.
RE: How to do this sequence in 2.2.7 - micheus - 11-13-2021
It can be a little extended process, but it works for Shure.